http://filmandtvcranes.com/wp-content/uploads/2015/12/single-default.jpg

Crane Operator Tips For Working In Bad Weather Conditions

 

NMT Crane TV and Film Hire- Crane operator tips

Crane Operator Tips For Working In Bad Weather Conditions

Working with large and heavy machinery in itself can be a dangerous job and a hazard to your safety. When you are working from height and operating powerful cranes and other dangerous equipment, safety measures must be taken seriously. Your training and experience can help to prevent accidents occurring, however, you can never predict how bad the weather can get when you are operating this machinery. Without the correct preparation, a bad turn in the weather could damage your equipment and possibly put yourself and others in danger. This post will advise you on the precautions and give the best crane operator tips coming from the professionals here at NMT TV and Film crane hire. Explaining the dangers that you should be made aware of and what to do if you are stuck in this situation.

Lightning

Operating cranes and other heavy machinery in unpleasant weather conditions can not only put your equipment at risk of damage but can put yourself and others in great danger of injury or fatality.

The nature of working with high tower cranes means that there is a higher risk of being struck by lightning. This is one of the most dangerous weather conditions. One of our main crane operator tips would advise checking the weather of the area before operating any lift, in case you get caught in any surprise inclement weather. If you happen to get caught in bad weather mid-operation, we suggest you lower the crane as much as you can before turning off the power. We would also advise sheltering yourself and other workers as far away as possible from the machinery. Before operating any crane equipment after a thunderstorm, you need to thoroughly inspect the machinery in case of any damage made.

Windy Conditions

Extreme wind is another inconvenience. Wind can be very dangerous to the equipment and driver as it causes the machinery to swing, this gives the driver a lack of control and can even cause the load to fall if the winds are strong enough. It’s important to remember that wind speed is much greater the higher up you are. Another one of our main crane operator tips would be to use the recommendation of the maximum wind speed for the crane and anemometer to test whether it’s safe enough or postpone the lift until the winds have calmed down so you can continue to work safely and effectively.

Rain and Fog

Rain and particularly fog can be very dangerous weather conditions. to work in as they affect visibility. Heavy rain can cause the construction site to become slippery and hazardous to workers on the ground. Additionally, rain can cause issues with the machinery if moisture becomes trapped inside. This can cause problems with the clutch and brakes of the machine, which becomes problematic for future use. After heavy rainfall, the equipment should be inspected before being approved to work with again.

Conclusion

We hope that you have found this guide useful and informative. It is important to know the crane operator tips for yourself and your team, to make sure that you are working safely at all times and using them as a regular routine within your work.

Contact

For more information or any enquiries regarding the services we provide here at NMT Crane Hire, please contact us by filling out an online form or call us on 01753 785351 today.